Introduce

    Magic Music Studio is a  professional Multimedia software tools package.With it you can:

• Extract Audio from any audio and video files
• Edit an audio file visually(Cut, Copy, DeleteSelect, DeleteSilence, Paste, PasteFromFile, Mix, MixFromFile);
• Apply different effects to audio (Amplify, Compressor, Delay, Expander, Fade, Flanger, Invert, Normalize, Phaser, Reverb, Reverse, Silence, TimeStretch, Trim, Vibrato...);
• Apply different filters to the selected part of an audio file;
• Convert an audio file from one format to another;
• Grap audio CD to MP3;
• Record sound through your sound card, microphone, line in and any other sources. Captured sounds can be saved in WAV, MP3,WMA,OGG,VOX,AU,AIFF format. Using real-time conversion directly record sound without temporary files created;
• Batch Convert All Video (include Avi, Mpeg 1/2,Wmv,Asf,Mov,Qt,Mp4,3gp,3g2,Rm,Rmvb,dat,vob,Divx,Xvid,Flv...) to MPEG1, MPEG2, VCD-PAL, VCD-NTSC, SVCD-PAL, SVCD-NTSC, DVD-PAL, DVD-NTSC, Custom MPEG Size;
• Batch Convert All Video (include Avi,Mpeg 1/2,Wmv,Asf,Mov,Qt,Mp4,3gp,3g2,Rm,Rmvb,dat,vob,Divx,Xvid,Flv...) to Mp3

DownLoad    Buy Now($15.95)

FAQ

1. When I open a file, I got an error info, Why?

2. Can All video to Mpeg support DVD(.vob) files?
    Not always, All video to Mpeg supports DVD(.vob) files, but not supports some encrypted DVD. In addition you can install DVD CODEC and then try it again.

3. I converted a video file to MPEG2, SVCD or DVD formats, but i can't play the converted file with Media Player, Why?
    It is because of there is no CODEC of MPEG2 and DVD in your system. You should install the CODECS. In addition The K-Lite Codec Pack include them. 

4.How to Recording from Microphone?

.    Most sound cards provide the ability to receive sound input from  microphone, headphone and speaker ports. This is useful for recording voice or sounds to your computer.

1. Connect your microphone's cable to your sound card's Mic In port at the back. If you are not sure which port is correct, you can check the sound card to see if it is marked (sometimes with a picture of a microphone), you can use a process of elimination, check the documentation that came with your hardware, or contact the hardware manufacturer. 

2. Launch Audio Recorder. Correct to setting Audio Device ,Source Device and File Format.

3. Click Record button,The 'Record file to ' dialog will appear. Correct to setting output file,Start to record.

5.How to Recording from Videotape?

1. Connect left and right Audio-out terminals on your VCR to the Line-in port on your sound card.

2. Launch Audio Recorder.Correct to setting Audio Device ,Source Device and File Format.

3. Click Record button,The 'Record file to ' dialog will appear. Correct to setting output file,Start to record.

6.How to merge two or more selections together?

    1. Open an audio file;
    2. Drag your mouse with left button down along the waveform until the point where you desire to select a session of the file;
    3.Click Edit->Copy   to copy the selection to the clipboard;
    4. Open another audio file;
    5. Move the mouse to the point where you want to paste the selection to and left click it;
    6.Click Edit->Paste to paste the previous selection into the second file. Now two audio files are in the same file, you can then edit them as you like, and save them as one file.

7.How to apply a special effect or filter?

    1. Open an audio file;
    2. Drag your mouse with left button down along the waveform until the point where you desire to select a session of the file;
    3.Click Process and transform->(effects and filters) ;
    4. Adjust the parameters, and then click the Ok button;
　

Audio Process and transform

• Amplify Increase - Increase volume on selected part of audio file
• Amplify Decrease - Decreases volume on selected part of audio file
• Fade In - Creates a fading in (soft to loud) effect in the selected part of an audio file.
• Fade Out - Creates a fading out (loud to soft) effect in the selected part of an audio file
• Normalize - Normalization allows you to achieve the greatest amount of amplification that will not result in clipping (distortion). All parts of the wave are amplified at equal levels.
  
  For example, if the loudest peak of a waveform is at 80% and the quietest peak is at 20%, normalizing the file to 100% results in the waveform’s new loudest peak being 100%, and its new quietest peak being 40%.

• Chorus - Just as a chorus is a group of singers, the chorus effect can make a single instrument sound like there are actually several instruments being played. It adds some thickness to the sound, and is often described as 'lush' or 'rich'. 

• Delay - Delay can be used to create single echoes, as well as a number of other effects. Delays of 35 milliseconds or more will be perceived as discrete echoes, while those falling within the 15-34 millisecond range can be used to create a simple chorus or flanging effect. 
  
  By reducing the delay times further down into the 1-14 millisecond range, you can spatially locate a mono sound (a sound with the same information for both the left and right channels) so that it appears as though the sound is coming from the left or the right side, even though the actual volume levels for left and right of the wave are identical.

• Invert - This effect flips the audio samples upside-down. This normally does not affect the sound of the audio at all. It is occasionally useful, for example when the left and right channels of a song both contain equal amounts of vocals, but unequal amounts of background instruments. By inverting one of the channels and not the other, the vocals will cancel each other out, leaving just the instrumentals. Obviously this only works if the exact same vocal signal is present in both of the channels to begin with.
  
  Inverting doesn't produce an audible effect, but it can be useful in lining up amplitude curves when creating loops or pasting. If applied on a stereo waveform, both channels are inverted.

• Reverb - Reverberates selected part of an audio file.
• Reverse - Select this command to have the current selection play backwards by reversing the order of its samples. Reverse is useful for creating special effects. This effect reverses the selected audio; after the effect the end of the audio will be heard first and the beginning last. Some people reverse small portions of audio to make inappropriate language unintelligible, while others believe you can hear subliminal messages if you listen to speech backwards. You can also create interesting sound effects by recording natural events and reversing the audio.

• Flanger - Applies Flanging effect to the selected part of an audio file.
• Expander - Adds expander effect to the audio data array.
• Compressor - Reduces the dynamic range of a signal.
• Phaser - The name "Phaser" comes from "Phase Shifter", because it works by combining phase-shifted signals with the original signal. The movement of the phase-shifted signals is controlled using a Low Frequency Oscillator (LFO).

• Trim - Adds trim effect to the selected part of an audio file.
• Silence - Inserts a silence on selected part of audiofile
• Vibrato - Makes a Vibrato effect in the selected part of an audio file.
• Pitch Shift - Changes the frequency of the selected part of an audio file.
• Resample - Decreases or increases the rate of the selected part of an audio file.
• Stretch Time - Makes a Stretch effect in the selected part of an audio file, changing the pitch and duration.

• Insert silence - Insert silence in selected part of audio file

• Add Noise - Insert noise at the current selection

• Mix from file - Mixes the selected part of an audio file with another file.

Audio Filters

• Band Pass Filter - Applies Band Pass filter to the selected part of an audio file.
• High Pass Filter - Applies high Pass filter to the selected part of an audio file.
• Low Pass Filter - Applies low Pass filter to the selected part of an audio file.
• High Shelf Filter - Applies high shelf filter to the selected part of an audio file.
• Low Shelf Filter - Applies low shelf filter to the selected part of an audio file.
• FFT Filter  - Applies the Fast Fourier transform filter to the selected part of an audio file.
• FIR Filter - Applies Finite Impulse Response filter to the selected part of an audio file.
• Notch Filter - Applies the Notch filter to the selected part of an audio file.
• PeakEQ Filter - Applies Peak EQ filter to the selected part of an audio file.

System Requirements

• Windows 2000 or Windows XP.
• DirectX 9 runtime. [Downloads here]

How to Buy